Hello!
If the art is boardbased we have two main mounts thats applicable. The major difference is the distance to the wall that is 1/5", 0.5" or 0.9" (5, 13 eller 23 mm). The distance sets the hovering effect and the amount of shadow effect given.
Whether it´s an old mirror, a piece of wood from the sea or a high tech print on aluminum or acrylic we´ve got the mounting solution for the hanging. The wall mount is always the same, regardless which type of support frame is used.
The puzzle frame mounted on a piece of floor board, hanging on a small wall mount attached with a wooden type screw in a plaster wall, approx 8 lb (4 kg) of wine bottles hanging with a lever effect as well, much more force than a painting could cause.
This is to show how strong the support frame (not the puzzle type) is. One small wall mount attached with a wood type screw in a plaster wall, and a 26.4 lb (12 kg) kettlebell hanging in the frame. This frame can support many type of art works...
This is how the support frame is connected. A polyamide angle is pushed in by hand, or gently with a plastic hammer. No glue or other type of locking is needed.
This is a very versatile profile that works with most materials and does´t require any tools to assemble thanks to the puzzle design connecting the corners. It works with most materials, because it can be mounted either with screws or adhesive, based on the surface and density of the object. Available in several standard lenghts, starting on 4" (10 cm), then 6" (15 cm) and then in steps by 4" (10 cm) up to 28" (70 cm).
A very stable and secure support frame, mainly intended for hard, flat materials such as aluminum, acrylic, glass etc. Available in steps by 4" (10 cm) from 8" (20 cm) up to 43" (110 cm). The profile is connected in the corners with L-shaped connectors with extreme precision, so no glue or things like that is needed, and the corners will always be perfect. The precision makes the frame extremely strong, therefore easy to handle when mounting on the board, preferably with some adequate heavy duty adhesive tape. Available in either silver or black.
A very stable and secure support frame, mainly intended for hard, flat materials such as aluminum, acrylic, glass etc. Available in steps by 4" (10 cm) from 8" (20 cm) up to 43" (110 cm). The profile is connected in the corners with L-shaped connectors with extreme precision, so no glue or things like that is needed, and the corners will always be perfect. The precision makes the frame extremely strong, therefore easy to handle when mounting on the board, preferably with some adequate heavy duty adhesive tape. Available in either silver or black.
